Services

This is just an overview. Servicing is done in great detail and you will feel the difference and receive images and a list of work done.

General services and part fitting can be done on a home visit. General service plus, full services and wheel build are usually collected and returned within three working days. Travel within three miles of Truro is now free! Please email or call if you are further afield and we can make a plan for you.

General Service

£50 (+ parts)

A basic overhaul which, if carried out regularly, will enable most well maintained bikes to continue to give reliable service.

  • Frame & forks wiped down and checked for alignment

  • Headset checked for free movement and adjusted if required

  • Bottom Bracket checked for free movement and adjusted if required

  • Allen bolts checked and tightened to correct torque

  • External adjustment of all bearings

  • Lubrication of chain, mechs & cables

  • Adjustment of brakes and gears

  • Wheel hubs and rims checked for damage and wear

  • Pump and inspect tyres for wear and tear

  • Safety check (all fittings / mudguards / racks etc. are securely fastened)

  • Brakes checked for effective operation and adjusted

Does not include parts or servicing of suspension and hydraulic brakes.

 

General Service Plus

£80 (+ parts)

An enhanced Standard Service including all of the above items, but in addition the Bottom Bracket bearing set is stripped and re-greased and the Chain, Cassette, Chainset and Derailleurs are removed and degreased.

Does not include parts or servicing of suspension or hydraulic brakes.

 

Full service

£140 (+ parts)

The full service offers you a complete and thorough checkover and will mean that your bike is returned to a condition as close to new as possible.

Bike stripped down to the bare frame, cleaned and checked for alignment and damage. All threads cleaned and checked.

  • Hubs disassembled, cleaned, inspected, then rebuilt with fresh grease and refitted

  • Bottom Bracket removed, cleaned, inspected, then rebuilt or replaced as required, with fresh grease and refitted

  • Headset removed, inspected, then rebuilt or replaced as required.

  • All other fittings removed, checked for wear, cleaned and re-lubricated

  • Brake blocks / disc pads checked and replaced if required (Parts extra)

  • Replacement of any other worn parts if required (Parts Extra)

  • Safety check (all ancillary fittings)

  • All cables replaced, inner and outer.

  • Chain cleaned and lubricated, gears set up

Does not include parts or servicing of suspension and hydraulic brakes



Tyres & Tubes (Per item)

Fit tyre / tube (has a recycling fee for the tube/tyre included into the cost of the job)
£11.00

Hub gear / coaster / drum brake tyre / tube £20.00

Tubeless Setup (PER WHEEL)
£25.00

Chaincase fit tyre/tube (For Dutch bikes/Cargo Bikes/E-BIKES)
£40.00
Rim brakes (one pair of brakes, i.e front or back)
Adjustment (no new parts) £10.00

Adjustment (with new parts installed)£15.00

Disc brakes (one pair of brakes, i.e front or back)
Cable setup £15.00

Hydraulic setup (excluding hose trimming) £15.00

Brake bleed (DOT5 and Mineral Fluid) £25.00

Wheels (per item)
Wheel true £20.00

Hub service £20.00

Wheel build £60.00

Hub gear service £40.00

Transmission
Adjustment (no new parts) £15.00

Adjustment (new parts installation) £25.00

Internally routed cable replacement £25.00

Fit cassette & chain £25.00 includes gear hanger alignment and gear set up.

Fit crankset £15.00

Re-fit chain £10.00

Whole transmission degrease & adjustment inc, removal & refit £60.00

Hardware fitting
Fit saddle/seatpost £10.00
Fit rack £15.00
Fit bartape £20.00

Fit mudguards £20.00

Fit computer £15.00

Fit flat/riser bars or stem (Ahead)£15.00

Fit drop/butterly bars or stem only (Quill) £25.00

Fit bars with brake set up only £35.00

Fit dynamo/re-wire dynamo £40.00

Fit childseat (unless bought from us, is labour FOC) £40.00

Fit flat/riser bars with STI's (setting up gears & brakes) £50.00

 

Custom Builds starting from £200 labour – email to get started…